Mirage Turf Model Information

Tour-Putt™ Ultimate Model (TP-2RB) Our best putting surface - simulates tour bent grass	Multi-color design for a more realistic (non-shiny) natural look Comes in 12 ft. widths - requires no sand in-fill  Special water-proof soft 5mm rubber backing (assures a soft & true putting surface)  Can be partially sand-filled to help deaden the "ball-bite" when chipped onto  Shorter spring-set/textured fibers to create a "true bent-grass" surface without sand infill  Stimps out from about 9 to 11 (like most tour greens)  Can be installed as a direct glue down (with no sand infill) or partial sand assisted loose-lay  Turf has virtually no grain pattern 10 year limited residential warranty 5 year limited commercial warranty  Made for the ultimate "bent-grass" putting surface and will accept a short chip shot
Tour-Putt™ Model (TP-2U) Our best all around putting surface - simulates country club bent grass	Multi-color design for a more realistic (non-shiny) natural look  Comes in 12 ft. widths and special ordered 15 ft. widths  Special unitary "shock absorbing" backing that helps deaden the ball when chipped onto  Can be partially sand-filled to help deaden the "ball-bite" when chipped onto A little longer spring-set/textured fibers to create a "true bent-grass" surface and helps to grab the ball when chipped onto  Stimps out from about 8 to 10 (like most tour and country club greens)  Can be installed as a direct glue down (with no sand infill) or partial sand assisted loose-lay  Turf has virtually no grain pattern 10 year limited residential warranty 5 year limited commercial warranty  Our best putting surface that can accept short approach or chip shot
Mirage Classic-Putt™ I Model (MCPI) Simulates Bermuda grass - our sand-fill model	Single-color design design 12 ft. widths  Unitary "Action" backing Spring-set fiber construction is a little less dense than our Tour-Putt models  Stimps out from about 7 to 9 (more like a municipal course Bermuda green)  Turf has a slight grain pattern (like most Bermuda grass greens)  Excellent product to hold a ball and chip onto (short chip shots)  Can be installed as a direct glue down or can be loose laid and sand filled  5 year Residential Limited Warranty  3 year Commercial Limited Warranty  Special unitary "shock absorbing" backing that helps deaden the ball when chipped onto
Mirage Classic-Putt™ II Model (MCPII) Simulates Bermuda grass - our deep sand-fill model	Single-color design design 12 ft. widths  Special unitary "shock absorbing" backing that helps deaden the ball when chipped onto  Straight fiber construction is a little less dense than our Tour-Putt models  Stimps out from 7 to 9 (more like a municipal course Bermuda green)  Turf has a slight grain pattern (like most Bermuda grass greens)  Excellent product to hold a ball and chip onto (short chip shots)  Can be installed as a direct glue down or can be loose laid and sand-filled  5 year Residential Limited Warranty  3 year Commercial Limited Warranty

Note: All our models of synthetic turf can be partially (lightly) sand-filled to weigh down the turf. They are also designed to be directly glued down on our Epoxy/Foam Base, Florathane Aggregate Base, or Cement Base. All loose laid turf installed over compacted aggregate must be partially sand weighted. Sometimes a little sand infill or our special round quartz infill can assist in deadening ball bounce, when long velocity approach shots into the green are necessary. Stimp speed readings can vary from each manufactured run of turf or between the different models.

Putting Greens Inc.
4285 Rose Lane - Gladwin, Michigan 48624
Phone: (989) 302-2434 - Fax: (989) 343-1264
Email: Dan@PuttingGreensInc.com

Copyright 2000-2004 Mirage Putting Greens International Inc.
This site proudly hosted by Name Your Price Web Hosting

Click Here to Get YOUR Website in a TOP 10 Search Engine Position - Top 10 or FREE